Cutting Machine -3
Working theory of the cutting machine:
Put the cake together with the bottom board onto the overturn plate, then move to the small slipway near cutting, after turn 90º , the cake will be move to the cutting place from the slipway, then level cut the cake in four sides, and crossing cut the cake. After the cutting the cake will back to the overturn plate from the slipway, turn 90 º In reverse direction, the cake will back to the overturn plate, the whole process will finish automatically.
Advantages of the ground overturn cutting machine:
1. Structure compact, easy to operate, less maintenance.
2. The level cutting and vertical cutting can be finish only once.
3. Cut the cake in 6 sides, the final product accuracy is accord with standard of GB/T11969-1997.
4. Can also satisfy the requirement of producing slab, the final product accuracy is accord with standard of GB15762-1995.
5. Can recycle all the waste slurry, no secondary pollution.
6. Cake no conglutination.
7. Level cutting adopt screw drive, solve the original problem of the lack of synchronization by hydraulic transmission.
8. No Limit and interlocked in mechanical systems to prevent accident by the improper operation of the equipment.
9. Have rapid replacement wire device.
10. No defective products.
Main technical parameters:
|Cutting cycle (about)||Capacitym3/year||
|1||4M||4050x1240x650||6 min/mould||≥ 100, 000||Cut 6 sides± 2||26.5||11000x4200x5600|
|2||6M||6050x1540x650||6 min/mould||≥ 100, 000||Cut 6 sides± 2||30||13200x4600x5800|